Fix The Windows 10 Does Not Go to Sleep After Idle Time | Windows Sleep Mode Issues

Sleep Mode feature is a useful feature of Windows 10 which saves you power as well as get your system in a ready mode in seconds. However, sometimes this feature does not function properly and your Windows 10 computer does not go to Sleep Mode. This can raise fear of your desktop pixels getting burnt amongst other issues. In case you find yourself struggling with the same problems, we would help you tackle the issue by trying out a series of solutions. Work your way through the predicament till the desired result is obtained. Read on:

  1. Check the Sleep Mode Settings

 

windows sleep mode issues power options windows 10

Sometimes the issue can be as silly as wrong settings. Thus, the foremost step is to check and verify if settings are in order.  For it, head to Control Panel> Settings> Power Options

The settings selected here must be ‘Balanced.’

power options windows 10

Next click the tab, ‘Choose when to turn off the display’ in the left Menu List, Here you would see an option, ‘Put the computer to sleep.’ Ensure that the time settings here are appropriate and suit your needs. It should neither be too early or too late. If any disparity has been detected and you rectify it, your forts port of call is done and should resolve the issue. If not, move to the next step.

  1. Update Chipset Drivers

With Windows 10 still being relatively new, its drivers are continually getting updated. Updating tour Windows chipsets tend to resolve most problems. Check that you are running the latest version of Windows. You can also download the latest drivers from the PC manufacturer website for your Windows 10. Few of the important drivers that you need to pay special attention are network drivers, chipset drivers, and BIOS drivers. This should fix the issue. Else move to the third step.

  1. Run Built-in Utilities

power settings built in utilities

One terrific feature of Windows 10 is that it has plenty of context-specific troubleshooting utilities in its kitty. For it head to Control Panel and click on the Troubleshooting section. Now click on View All to display a list of all troubleshooters installed on your system.  Run the one labeled “Improve Power Usage.” The problem should get resolved.

  1. Check for Power Requests

sleep mode issue solution with cmd prompt

It has been diagnosed that many a time, any software or program installed on your computer system send power requests to keep the system awake. Consequently, your system is unable to go to sleep mode.  To troubleshoot this issue, you need admin rights. For it, right-click the Start Menu and select the option- Command Prompt (Admin). In the new window, type in the command, ‘powercfg – requests’ and hit Enter. A list of an item should come up which should have ‘None’ beside it. This implies that they are not sending any power requests. The program which does not have ‘None’ but any other value besides itself is the one that is causing a disturbance in the sleep mode. Depending on the program, you can take the next step. For instance, Skype call could be the culprit. Uninstalling Skype would resolve the issue. In case it is a mandatory program of the computer, the next step should be taken accordingly. Using command prompt one can make windows genuine and fix WGA

By this time, the issue should have been fixed. If it persists, you might need expert help.

 

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *